Regular Care

Sweep or vacuum regularly to remove dirt and grit that can abrade, dull or scratch your new floor. Do not use a vacuum with a beater brush, because it may damage the floor`s surface.

Wipe up spills promptly with a damp cloth or mop.

For a more thorough cleaning, wash your floor with Congoleum Bright `N Easy No-Rinse Cleaner or other suitable, non-detergent based resilient floor cleaner.

Remove excess water after washing the floor.

The gloss level may change over time depending on the amount of traffic, care, and maintenance the floor receives. To restore the appearance, first use Congoleum Bright `N Easy Polish Remover to remove any ground-in dirt and excess polish buildup. Rinse thoroughly. Then apply Congoleum Bright `N Easy Floor Polish (03002) to obtain a high-gloss finish or Congoleum Bright `N Easy Satin-Gloss Floor Polish (03007) to obtain a satin-gloss or natural-gloss finish. Do not apply polish to DuraCeramic, DuraPlank II, AirStep Advantage, AirStep Evolution, AirStep Plus or Ultima.

Caution: Avoid one-step "mop and polish" products, dishwashing liquids and oil-based cleaners. These may leave a residue which can attract dirt and dull your floor`s finish. Avoid cleaners that contain abrasives or solvents which may permanently damage your floor.

Wet floors may be slippery and dangerous.